MPLS – Traffic Eng (Dynamic quick sample)
MPLS traffic Engineering
————————-
Basic Traffic engineering with MPLS-TE tunnels (Dynamic)
under the interface on every router that needs traffic engineering
- Enter Globally
mpls traffic-eng tunnels
- Under each interface that is involved
interface x/x
mpls traffic-eng tunnels
ip rsvp bandwidth
Head End configuration
interface Tunnel0
ip unnumbered Loopback0
tunnel destination 150.1.1.6
tunnel mode mpls traffic-eng
tunnel mpls traffic-eng autoroute announce
tunnel mpls traffic-eng path-option 1 dynamic
no routing dynamic
Important configuration is to point a route so traffic goes through the tunnel
- Static
- Dynamic
- PBR
Dynamic
tunnel mpls traffic-eng autoroute announce
Advertisement
No comments yet.
Leave a Reply
-
Archives
- November 2010 (1)
- September 2010 (1)
- May 2010 (2)
- April 2010 (1)
- January 2010 (1)
- December 2009 (3)
- October 2009 (1)
- September 2009 (1)
- August 2009 (8)
- July 2009 (16)
- June 2009 (55)
- May 2009 (36)
-
Categories
-
RSS
Entries RSS
Comments RSS